This a terrific solution for taking in up to 16 HD HDMI signals from any source and modulate them into any agile analog channels. Simple and easy way to distribute high definition signals to legacy TV distribution systems. Comes equipped with a pre-programmed channel list and its ability to setup any of those channels anywhere in the spectrum, operators can set up the modulator quickly and efficiently.
This is particularly a unique modulator because most Analog Modulators on the market require CVBS input, in most cases the HDMI sources would need to be converted externally to CVBS.
Our device is doing it for you so you could use any SD/HD HDMI source, which then converts it internally to baseband video then modulates it to the Analog channels of your choosing.
This modulator is HDCP compliant and works with any HDMI sources and also comes with a network port for NMS, ethernet connection allows for remote access and management system.
H-16HDMI-RF-AMOD - 16 HDMI Inputs - 16 Analog RF Out (NTSC)
H-16HDMI-RF-AMOD-PAL - 16 HDMI Inputs - 16 Analog RF Out (PAL)
Similar model but with HDMI inputs:
H-16RCA-RF-AMOD - 16ch RCA CVBS Analog Baseband Video / Audio to 16 CATV RF NTSC Agile modulator
H-16RCA-RF-AMOD-PAL - 16ch RCA CVBS Analog Baseband Video / Audio to 16 CATV RF PAL Agile modulator
|
INPUT |
|||||
|
Input Connector Management |
HDMI x 16 Front Panel Buttons and LCD and NMS IP - 10/100 Ethernet, DefaultIP 192.168.1.30 |
||||
|
VIDEO |
Input Resolution |
1920*1080_60P; 1920*1080_50P; 1920*1080_60i; |
|||
|
1920*1080_50i; 1280*720_60P; 1280*720_50P |
|||||
|
OUTPUT |
|||||
|
RF |
Output Connector |
F-Female @ 75ohms |
|||
|
Output Frequency |
45 ~ 870 MHz |
||||
|
Output Level |
110 dBμV = (+50dBmV ) |
||||
|
Adjust Range |
0 ~ 20dB |
||||
|
Output-band Rejection |
≥ 60dB |
||||
|
GENERAL |
|||||
|
Power Supply |
AC 90 ~ 264V @ 47~63Hz |
Power Consumption |
<100W |
||
|
Cooling Fans |
3 |
Dimension |
48.4*32.9*4.44 (CM) |
||
|
Shipping Weight |
6.5 KG |
Carton Size |
55*39*13 (CM) |
||
That device will work for your application, however this is an analog
modulator, the otu0put quality picture will not be HD, even though the
inputs can be HDMI.
If you're looking for something that can take in HDMI, but also output
HD quality in 1080 you should be looking at device like this
https://thorbroadcast.com/product/1-4-or-8-hdmi-digital-rf-encoder-modulator-8230.html/239
This is a 16-channel analog NTSC, not digital HD QAM, modulator.
The answer is yes if the TV supports an analog NTSC modulated signal;
they usually do 99% of the time.
It will display a 4:3 image on a 16:9 screen, so the sides of the
screen will be black.
If you need a digital full HD 16:9 modulator, please check out this
8-channel HDMI Thunder-8 unit.
https://thorbroadcast.com/product/1-4-or-8-hdmi-digital-rf-encoder-modulator-8230.html/239
16 Channel Analog Agile Modulator - NTSC PAL SECAM
Professional 16 Channel Analog Baseband CVBS Video Audio to CATV RF NTSC Analog Modulator - NTSC PAL SECAM in 19" rack The unit has 16 Analog CVBS Baseband Video Audio RCA Inputs, analog modulated agile channels can be selected individually across CATV RF spectrum from 45Mhz - 860Mhz
HDMI RF Modulator Chassis System 1-12 Units
The Thor Compact RF-PETIT Digital Modulator is already designed to be sleek and easily installed anywhere. To make life easier, Thor Broadcast also has a compatible rackmount kit that can be installed in a 19" 1RU rack for simplicity. This rack system provides the horizontal racks that can quickly mounted to any 1RU rack; the multi-unit sets already come with the rack mount hardware so you can attached the rack ears to the Petit's and then fasten to the horizontal bars in the Rack. Easy to deploy and simple to setup, holes are pre-drilled in the units so you can get your units up and installed efficiently. This quick and easy installation process allows you to vertically mount up to 12 HDMI-RF-PETIT units in a rack with easy access to the inputs and outputs of the device.
ES
