SDI to DVB-S/S2 Satellite Modulator

H-1SDI-DVBS2
Qty: 0
Availability: In stock Condition: new
Shipping: starting at $10 Warranty: 2Yrs
ask about product
send request
Description Features Drawings Model Selection Specification Q&A Documents Support
Description

HD/SD-SDI 720p/1080i/1080p Encoder + Satellite DVB-S/S2 Modulator  

It is integrated  HD encoder with DVB-S/S2 modulator - HD up to 1080p HD/SD-SDI input , H.264 / MPEG2 encoding

It also  have ASI input, ysor passing external TS from different encoder or muxes external TS with the TS our unit encoders.

 

DVB-S2 MODULATOR

It is integrated  HD encoder with DVB-S/S2 modulator - HD up to 1080p HD/SD-SDI input , H.264 / MPEG2 encoding

It also have ASI input, ysor passing external TS from different encoder or muxes external TS with the TS our unit encoders.

Thor DVB-S/S2 Encoder & Modulator is an integrated HD Video Encoder with the sattelitte S2 modulator. Hot- swapable modules with diferent video inputs  (CVBS/SDI/HDMI/YPbPr…) are available.

It has also 1 channel ASI input for external  TS (MPEG2 or H.264) multiplexing  . It outputs ASI and DVB-S/S2 RF (IF Optional) simultaneously.

The signal source could be SDI camera, HDMI Blue-ray players and etc. It has web-based NMS GUI interface for easy online management.

Featuring its high performance and low cost, the S2 is especially used by TV stations or DSNG systems to encode SD/HD programs and output to uplink.

 

CONFIGURATION PAGE FOR sATELITTE MODULATOR

Features
  • Convert HD-SDI or  HDMI or  Component YPbPr HD Video to Satellite modulated carrier 
  • Any SDI or  HDMI & YPbPr Inputs up to 720p/1080i/1080p
  • Licensed HDMI inputs
  • Closed Captions supported on 608 Analog Inputs
  • Support DVB-S/S2 RF (IF Optional - Model Specific) ) output and ASI output
  • Output Frequency: 950-2150MHz; or IF: 50-200MHz (Model Specific)
  • Support 10MHz reference clock
  • ASI Input for additional TS multiplexing from any other encoder
  • Fully IP control and Network Management through browser
  • Front Panel LCD local control   
  • IPTV Output Unicast or Multicast IGMP UDP (optional)
  • ASI Output with multiplexer cherry picking
  • Low Latency available   70-120ms
  • AC3 Audio available (AC3 model)
  • MPEG2 Video or MPEG4 H.264 Encoding
  • Support RF 24V power output
  • Other Video Inputs cards available – Hot swappable - SDI Card, YpbPr Card, HDMI Card
  • 5 Year Warranty - Free Tech Support - Cables and Power Supply included
Drawings
Model Selection

TWO MODELS AVAILABLE: L-band or IF (Intermediate Frequency)

1)  H-1SDI-DVBS   with ( 950Mhz - 2100Mhz)   L-band  RF output

2)  H-1SDI-DVBS-IF with  IF (50-200mhz) RF output  

 

Base Main  Model H-1SDI-DVBS2  has 1 HD/SD-SDI input and L-Band RF DVB-S/S2 Output

 The configuration page for S2 modulator with L-band 950-2100 Mhz RF output; or IF: 50-200MHz

H-1SDI-DVBS

H-1SDI-DVBS-IF

1 HD/SD-SDI Input / L-Band RF DVB-S/S2 Output

1 HD/SD-SDI  Input / IF Output

 H-1HDMI-DVBS

H-1HDMI-DVBS-IF

 

1 HDMI video  Input / L-Band RF DVB-S/S2 Output

1 HDMI Input / IF Output

H-1CVBS-DVBS

H-1CVBS-DVBS-IF

1  CVBS Video Input / L-Band RF DVB-S/S2 Output

1 Analog CVBS Input / IF Output

H-1RGB-DVBS

H-1RGB-DVBS-IF

1  YPbPr Video  Input / L-Band RF DVB-S/S2 Output

1 YPbPr Video  Input / IF Output

   
Specification
low 70-250mn latency models  avialable
  • Input
SDI or HDMI or  YPbPr or CVBS up to 1080P60
  • Resolurion :

1280x720P 60 / 59.94 / 50 Hz
1920x1080I 60 / 59.94 / 50 Hz

1920*1080_60P, 1920*1080_50P, (-for MPEG4 AVC/H.264 only)

1920*1080_60i, 1920*1080_50i,

1280*720_60p, 1280*720_50P

720*480_60i, 720*576_50i

 

  • Video Codecs
MPEG-2 HD 1.5-19.5 Mbps
H.264 HD 0.8-19.5 Mbps
  • Audio Codecs
MPEG-1 Layer II
MPEG-2 AAC
MPEG-4 AAC AC3 Dolby Audio Dolby Passthrough
  • Audio Sample Rate
48 kHz
  • Audio Bit Rates
64 kbps, 96 kbps, 128 kbps, 192 kbps, 256 kbps, 320 kbps
  • Outuput

DVB-S/S2 RF (IF Optional) output; ASI output

DVB-S/S2 Modulation Section

DVB-S QPSK: FEC 1/2,2/3,3/4,5/6,7/8

DVB-S2 QPSK: FEC 1/2,3/5,2/3,3/4,4/5,5/6,8/9,9/10

DVB-S2 8PSK FEC 3/5,2/3,3/4,5/6,8/9,9/10

RF output: 950.00-2150.00 MHz, 10Khz step

IF output: 50-200MHz (MODEL SPECIFIC)

Symbol rate: 0.05-20.0Msps

Roll Off: 0.35, 0.25, 0.2

Output level: -10db~-41.5db

  • RF Frequency Range
RF output: 950.00-2150.00 MHz, 10Khz step
  • RF Power Level
Output level: -10db~-41.5db
  • DVB-ASI Output
BNC Connector: 1-60 Mbps
  • DVB-ASI Input
BNC Connector: 1-120 Mbps
Programs Selected by PID
Programs Muxed to all Outputs
  • IPTV Output (Optional)
MPEG-TS MPTS over UDP
Unicast and Multicast Supported
  • Power Input
100-240 VAC Auto Switching
~ 20 W
  • Dimensions
19 x 17 x 2 Inches
  • Weight
9 Pounds
  • Operating Temperature
32-110 F
Question and Answers
Answer:
1) If that encoder needs to support 4:2:2, then we can do via external encoder : this is the only way we can do it, 2 separate units, one as an encoder second as a modulator H-MPEG2-H264-E2 , SDI input -ASI output, ( support 4:2;2) https://thorbroadcast.com/product/all-inputs-iptv-streaming-and-asi-hd-encoder-608-708-captioning-8230.html H-1SDI-DVBS2 DVBS2 Modulator ASI input - L-band Output https://thorbroadcast.com/product/sdi-to-dvb-s-s2-satellite-modulator.html/114 2) Yes, that is why you need both pieces, one unit to encode in 4 2 2 and the other unit takes a TS from the encoders ASI and modulates it to an RF channel.
Documents
downloadusers-manual.pdf
User's Manual is avalible only for logged users.
Similar products:

Satellite DVB-S/S2 DVB-S2X Modulators with RF CID - Carrier ID

SNG satellite modulator with ASI and IP stream input and satellite L-band or IF DVB-S/S2 DVB-S2X RF output with 10Mhz reference clock and 24V Now supports RF CID

DVB-S/S2 Satellite Modulators

Carrier grade DVB-S & DVB-S2 satellite modulator for 3x redundant hot inputs for highest reliability and fall over protection. Provides latest generation support for 16APSK and 32APSK modulation constellations.

Contact Us

Thor Broadcast Sales


Customer Service/ Support